When the driver is running you should find the driver's system tray icon in the system tray as shown on the right. If you don't see it you may need to configure the properties of the system tray to make it visible all of the time.

SystemTrayIcon

Hovering the mouse over the system tray icon will bring up the Mount Status Window shown below. The window will display for 5 seconds after the mouse leaves the system tray icon unless you check the option to keep it open.

StatusWindowA

If you find this window gets in the way of accessing the system tray icon, you can enable "Keep this window open" and move it to the side, and then access the icon

Right clicking the system tray icon brings up a menu of operations that you can perform.  Possible menu items include:

SystemTrayMenuA

Driver Handbox...

Opens the driver handbox window or, if it is already open, bring it to the front.

Setup Telescope...

Opens the Telescope Setup window.

Setup Focuser...

Opens the Focuser Setup window.

Log File Zipper Utility

Opens the Log File Zipper program (ApLogZipper). It allows you to package a set of log and configuration files when reporting a potential problem with your equipment or the ASCOM driver.  Please use APCC's log zipper if also using APCC!

Timer Utility

Opens the Timer program (ApTimer). It allows you to set a timer that will stop mount tracking or park the mount.

Jog Utility

Opens the Jog program (ApJog). It allows you to slew the mount precise distances from its current location.

Polar Alignment Scope

Opens the Right Angle Polar Alignment program.

Park...

Opens the Park options window.

Unpark...

Opens the Unpark options window.

Disable Tracking

Stops mount tracking.

Enable Tracking

Starts mount tracking.

Show Status Window

ShowSystemStatus

Provides three options controlling the display of the Mount Status Window described above:

When hovering over system tray icon: This is the default action and behavior of the Mount Status Window in versions 5.00.01 and earlier of the driver. When the mouse is hovered over the system tray icon the Mount Status Window will display.

When hovering over system tray icon when driver window hidden: the Mount Status Window will display when the mouse is hovered over the system tray icon and the driver's virtual hand box is hidden .

Never: this disables the display of the Mount Status Window.

Show Log Window

If checked the log window will display when logging is enabled.

Force driver handbox window to top every 5 seconds

Used if you want to force the driver window on top when another application forces itself to the top and hides the driver window. This is helpful if you want to have the ascom handbox window on top at all times but other applications interfere.

Help...

Opens this help file.

 

Astro-Physics AP V2 Driver v5.60.xx